MRC 50 NO LONGER AVAILABLE - **USE MRC 55 AS NEW CONTROLLER**

$ 1,500.00

FUNCTIONALITY OF MRC50E-100 MULTIFUNCTION CONTROLLER

The MRC50 controller is a microprocessor controlled multifunction unit. The control voltage is

rated maximum 24v @1A. The controller has 8 inputs [IN1 through IN8 (24vDC)] and 4

potential free Normally Open relay outputs [K1 through K4].

The controller is also equipped with four RS232 COM ports [COM1 through COM4] for

communication with the display and ticket mechanism. Programming of the MRC50 controller

is performed using the four color-coded programming buttons. The buttons are used to

configure a variety of controller options allowing the MEC70 Entry Station to be individually

configured for a high variety of installation requirements. The user can view the different

settings in real-time on the LCD display located on the front of the MEC70 housing.

Note:

For security, reason the MRC50 controller is not accessible from the access door. The MRC

50 controller is located below the top hood and is covered by a protective housing, which

allows authorized users to change the settings using the exposed programming buttons (see

pictures above for exact location, page 11). In order to hard wire the MEC, it comes with a set

of input and output terminals located in the base housing. In order to access those terminals

another protective cover has to be removed (see picture page 10). The terminals are

numbered and represent the exact same inputs and outputs as the MRC50.